AL-KO CLEAN UNIT F W3 welding fume filter

High-performance AL-KO CLEAN UNIT F W3 mobile welding fume filters are ideal for extraction during welding of high-alloy steels. In addition to manual and automated welding processes, they can also be used in welding robots. The W3 approval mark allows the return of the filtered air into the workspace.

AL-KO quality

High filtration efficiency

W3 approval allows return of air to the workspace

Quiet and powerful

Low-dust disposal of the separated dusts

Receive consultation in person
Operating principle

The fumes that occur at the welding point are captured by extraction arms and hoods and conducted through a pipeline to the suction nozzles of the AL-KO CLEAN UNIT F W3. Coarse particles are filtered out there in a large pre-separator chamber. The following filter cartridges of dust class “M” filter out the remaining fine dust. During operation the filter cleaning system, which is controlled by differential pressure, removes particles adhering to the filter cartridges. Venturi tubes on the filter cartridges increase the cleaning effect while ensuring steady suction force and long filter life. A volume flow monitor constantly monitors the required suction capacity and signals a warning if drops below the set value. The separated dust is collected in an easily movable container lined with a collection bag for low-dust disposal. The filtered air is returned to the room at the top of the unit.

Your benefits
  • W3 approval mark allows circulating air operation also for welding of high-alloy metals
  • An efficient fan and cleanable long-life filters ensure constantly high suction capacity
  • Extremely quiet due to highly effective sound insulation
  • For single welding stations and for connection to pipelines
  • IE3 motors for high energy efficiency
  • Compatible accessories for diverse welding applications
Applications
  • For welding applications with high-alloy metals
  • Extraction at single welding stations and at pipeline systems with multiple extraction points
  • Flexible extraction at alternating welding stations or at permanently installed extraction points
Options & variants
  • Noise-dampening hood for extreme sound requirements
  • Patented dust compartment for dust-free emptying of container
  • Frequency inverter for power-based operation
  • Spark trap minimizes risk of fire
  • Extensive accessories such as extraction arms, capturing hoods, pipes, hoses, etc.
  • IE 4 motors or higher value on request
  • HEPA post-filter class H13 or H14 for highest filter performance

Technical data

AL-KO CLEAN UNIT F W3
Device type CLEAN UNIT F 42-2.2* CLEAN UNIT F 50-3* CLEAN UNIT F 84-7.7* CLEAN UNIT F 100-7.5*
Suction nozzle ø in mm 160 200 250 300
Max. airflow in m³/h 2,200 3,200 5,000 6,000
Max. vacuum in Pa. 2,800 3,200 3,800 4,000
Motor rating in kW 2.2 3 7.5 7.5
Filter area in m² 42 50 84 100
Sound pressure level in dB(A) 70 72 72 72
Dimensions L x W x H in mm 1,660 x 1,106 x 2,075 1,650 x 1,106 x 2,075 1,910 x 1,106 x 2,075 1,915 x 1,106 x 2,075

All values are approximate and refer to the basic version; subject to technical modifications.

Contact partner

Are you interested in the AL-KO CLEAN UNIT F W3? Our experts will be glad to give you information.